Switches - Small Business

Hi All,Does the SG-300 switch support Multicast VLAN routing ?Can I have a IPTV Vlan and distribute the feed to 10 different Vlans ? I have tested the multicast-tv vlan feature but it sends all the multicast groups to the client port in which we tag ...

Is there a way to change the MAC address on a single port on a SG300 switch? I have a setup similar to this:https://farm6.staticflickr.com/5564/14352098480_9a2eb52af0_o.pngbut with two dynamic IP WANs. I am finding that both my WANs are binding to th...

Hi there,I have a problem with all SG300 firmwares. The ifLastChange value (which is in timeticks after last restart of the switch) has some kind of overflow around 50 days... at the moment I have no counter which is greater than.1.3.6.1.2.1.2.2.1.9....

I have two issues.First, my SG300-10's default IPv4 route keeps defaulting to the lowest numbered subnet I put on the switch. I'm using 10.xx.xx.0/24 subnets. My VLAN1 is on 10.90.90.0/24 subnet and VLAN11 is my WiFi guest access with 10.11.11.0/24 s...

I am in the process of setting up this switch and I have a few questions regarding the smartport and voice vlan (default tagging).1. If I am not using any other cisco devices and not needing LLDP (and CDP) is it safe to un-check/disable those options...

I need more calcification for the SG500X-24-K9 uplink and staking ports ?All i need to confirm that SG500X-24-K9 have 2SFP+ for uplinks and 2SFP+ for stacking ports or 210G RJ-45 for stacking ports?

I seem to have an odd issue with this brand new switch that I purchased a couple weeks ago.  I am using this switch for IP Cameras and other PoE and PoE+ devices and so far everything appears to be working as expected (still staging equipment/cameras...

Is there a way to force VLAN Interface state to stay up?I have SG300-10MPP with all ports configured as trunk port.  Some of these ports have VMware ESX servers connected.  The ESX servers communicates on several different VLANs.  However, the SVI in...

Dear AllDefault firmware : 1.2.9.44I try to update firmware my cisco small business sg300-28 28-prt gigabit managed switch get Error:firmware version 1.4.1.03Upgrade/Backup Firmware/LanguageBytes Transferred:0Status:Copy failedError Message:Illegal s...

 Cisco Small Business 300 Series Managed Switches What are the most current 24- and 48-port PoE models??Thank you, Tom

Hello, Looking to purchase Qty 3 SG300-52MP to replace the switches on my voice network.  In cascade/bridge mode will I be able to do a port mirror on every port on all 3 switches? What I'm looking to do is purchase voice recording software from some...

I've misplaced the rackmount kit that came with my SG 300-20, but can't seem to find anywhere that sells one. Any suggestions where I can get one? Thanks, Jonathon