Switches - Small Business

My current router is not vlan aware and without having to resort buying a new router and or new switches,I would like to be able to leverage two switches running in L3 mode. I have come up with the following possible design, I havent tested this idea...

We have Cisco 3650 and Cisco SG200, they are connected together with trunk link, and some VLANs in there, All VLAN access between two cisco devices on Windows device are working well.However, they are no connection when using thunderbolt ethernet on ...

I am setting up a test lab with multiple identical installations of hardware.  At each bench installation spot we have an SG200-18 to handle network traffic at this instance.  At each instance there is a control PC and a line feeding to our lab netwo...

Hi,I have the following setup:Service Provider connected to SLM2008 port 2SLM2008 connected to SG300-20 using LAG2SG300-20 connected to SG200-08 using LAG1SG200-08 port 1 connected to PCI have configured VLAN 4 to isolate this (port-to-port)​ traffic...

I still have a problem on routing of sg300 L3Can someone help me on this User Name:ciscoPassword:*****SOW#sh runconfig-file-headerSOWv1.3.0.62 / R750_NIK_1_3_647_260CLI v1.0set system mode routerfile SSD indicator encrypted@ssd-control-startssd confi...

Hi, we need to enroll some SG500-28P switches to a CNA? Is this possible? I suppose that CDP feature allow this. Actually, i have installed CNA Ver. 6.0. Thanks in advance.

       Hello,I'm trying to get a network of SGE2000 switches mapped into Cisco network assistant.It always comes back with the device type unknown and status unsupported device.Is there a way to fix this ? I'm using Cisco network assistant ver.5.7(6)...

Hi, I can't get working DHCP server on SG300 (layer 2) on interfaces set as "Private VLAN - Host". I described my setup here. Everything works well except assigning addresses on ports with secondary VLANs here is my setup: VLANs: vlan database vlan...

Dear Cisco Support Community, I've recently implemented a Cisco SF500-24 switch at customer's site. Now there is a simple, but disturbing problem: I can't manage the switch via https / ssh when coming from a remote subnet (separted by a firewall). On...

We have three Cicso Catalyst 3750 switches that are stacked.  The primary switch has a VLAN ( # 99 ) setup on it. The VLAN has our incoming internet connection. The LAN ports from the two redundant firewalls are routed back to the primary switch ( no...