Switches - Small Business

Hi, I'm hoping someone can help me with this - I have an SG300 in L3 mode with three test VLAN's:VLAN100 (Workstations) - 10.1.100.1/24VLAN240 (Management) - 10.1.240.1/24VLAN250 (WAN-Access) - 10.1.250.1/30I've configured port 28 on the switch as a ...

I have a client who was using 2 SF100D-16 10/100 switches along with their RV200W.  The phone system is through VoiceRing and I believe the phones are linksys phones.  I'm unfamiliar with the details of that that setup except that the phones have the...

We have two switches, a SGE2000P (24 port POE) and SGE2010P (48 port POE). We would like to know what the power consumption of the units are to purchase a UPS accordingly for them.

For whatever reason I can telnet from another switch to the SG300 switch but not directly to the switch. I also can't access the web interface or ping the switch. Any help would be appreciated. Here is the running configconfig-file-headerWasteWaterSG...

When I try to connect to my SLM2048 I receive the following message: "your browser does not seem to support xsltprocessor"How can I resolve this ? I'm using IE 11 and Chrome 40.0.2214.93 m 

I’m currently in the process of expanding my network having bought a second Cisco SG300-20 which is now sitting in my lab, my current setup is described below Internet^|Draytek Router 192.168.1.1^|Cisco SG300-20 192.168.1.2^|VLAN 12 Workstations inte...

Dear Support, I have a Cisco SG300 and Cisco 3560 switches.3560 is my Core Switch and SG300 is access switch.From 3560 VLAN information is not passed to SG300. 3560 Configuration:interface GigabitEthernet0/23switchport trunk encapsulation dot1qswitch...

When I try to connect to my SLM2048 I receive the following message: "your browser does not seem to support xsltprocessor"How can I resolve this ? I'm using IE 11 and Chrome 40.0.2214.93 m 

Dear Support, I have a Cisco SG300 and Cisco 3560 switches.3560 is my Core Switch and SG300 is access switch.On 3560 my all VLAN are configured and my PC which is connected to SG300 is not able to ping the gateway.From 3560 VLAN information is not pa...

Hi there, i hope you can help me i just created a vlan on a L3 Cisco SG300-28MP and works great but only if my RV042G firewall is off what can i do ? thanks in advance !!!

Here is the Scenario: - Cable Modem connected to ISP with 100Mbit/s Speed.- Cisco Router RV325 connected to Cable Modem on WAN1 port. Router acts as DHCP Server with 5 VLANs.- SG500-52 Switch (In router Mode) connected via trunk port to LAN2 port of ...

So we are putting a new cisco sf500 48 switch and I need to create a trunk on port 48 to allow traffic from our Layer 3 switch. When I trunk port number 48 and tag VLAN 100 and 200 the workstations are unable to communicate with devices on VLAN 200. ...