Switches - Small Business

We've been integrating and verifying some RSTP-capable hardware and have discovered what appears to be a minor bug in the SRW2008 RSTP protocol implementation. We've discovered that the SRW2008 switch fails to become the root bridge in spite of havin...

Dear TeamI am using sg300 for voip. i have created 5 voice vlans for different departments in my office.but my voip is not working. only 1 voice vlan is working out of 5 voice vlans. The voice vlan working is agreed voice vlan in sh voice vlan commad...

I have configured the storm-control command at a customers site as follow:Storm-control broadcast level 30Storm-controlaction shutdownMy understanding of the above congiguration, is that should the broadcast level go over 30% the port will be shut do...

Hello,I have 4 SGE2010P switches, and would like to know if they will work with Cat6A cabling. Shawn

I want to add this device into program and Cisco SG300-28 Show error log below.Log IndexLog TimeSeverityDescription21474827322014-Mar-31 13:54:34Warning%SNMP-W-SNMPAUTHFAIL: Access attempted by unauthorized NMS      21474827332014-Mar-31 13:31:27Warn...

Hi all, How can i query the mac addeesses of a sg300 switch. I didn't find an apprpriate command in cli until now. i only see the base address.

HelloI need to find what IP address is connected to a specific port that keeps dropping on an SG200-50 switch.Thank you

Hello,I would like to know the minimum and max. power consumption for the SG102-24 and SG100-24 switches (European versions, 220V)?Thank you,Regards

I want to add this device into program and Cisco SG300-28 Show error log below.Log IndexLog TimeSeverityDescription21474827322014-Mar-31 13:54:34Warning%SNMP-W-SNMPAUTHFAIL: Access attempted by unauthorized NMS      21474827332014-Mar-31 13:31:27Warn...

Hi,I am see the following error in the system log of my SG 500 Cisco switch:%IPADTBL-N-IPDUPLICATE: Duplicate IP address 192.168.0.1 from MAC 00:xx:xx:12:43:2e was detected on VLAN 200, port gi1/26, aggregated (4) When this error occurs, the PC conne...

I have read and read and read and from what I have read so far these switches are identical. They both support POE+, they both have 124 watts of POE power, they both have 8 POE ports, 10 gigabit ports. I for the life of me can't see what the differan...

I have a SG200-50P and a WAP321. I am trying to create a guest wireless network using a separate VLAN on the WAP321. I have the production traffic on VLAN 1 and the guest network is on VLAN 100. The WAP321 is plugged in to port 7 on the switch. It is...