Switches - Small Business

We got 1 customer that would like us to configure a system based on SG300-20 linked up with an SG300-10SFP using trafficshaping ingress and egress limited to 40mbit.This part of the case is solved using ingress/egress 40960 with an burtlimit a bith h...

Hello everyone,Question: Does any body know why  ports on my SGE2000 take so long (>60s) before forwarding packets to  the end user systems (desktop computers).I got two SG500X switches stacked in 10G mode and got two SGE2000 switches connected in LA...

Hi,I have a problem with switch SF-300-24P and AIR-AP1231G-E-K9.The AP is working fine in a switch 2960 or 3560, and I want to move it to a new SF-300-24P.When it is plugged in SF-300, the AP never get boot up , it obtains power, and blinks its leds,...

I'm using tftpd64 to try to update the bootcode, I keep getting an  error from the switch that the tftp server is unreachable and no  explanation why this is happening...I'm using my computer's wired IP and the full  filename, sx300_boot-13506.rfb, a...

We have 4x sg500X-48 switch now and we are still not sure to use the stacking option or not.Today we run MRTG to read with SNMP the switch stack but I can't find the stacking ports. Also in the webinterface I can't find the stacking ports to see util...

  Hi,I have 2 SG300-10mp switches which i am trying to create a link redundancy for over the two fibre ports.On the web interface when i go into the LAG settings ports g9 and g10 which are the fibre ones don't show up.How do i create the link aggrega...

hi,What is the best way to connect switch together (with 2960 switch)..cross or stright cable...up/down or normal port ?WAN ----Router 1 --- -SW1 ---- SW2                                  |                                  |                          ...

Have a SLM2024 Switch that I need to connect to 2 HP Switches. The HP Switches have a trunk between themselves and can communicate fine.  They are not stacked switches.I want to setup a network connection to each HP Switch, but do not want to create ...

Hello,I want to setup VLAN to separate attached devices (will use a VLAN capabel WLAN accesspoint).I am looking at the Cisco Small business products.Like this: SG200-08PThis is my goal:3 VLAN's: Internal, External, GuestDevices connected to Internal ...

Hello, does SG500 support LAG with ports on multiple switches? I would like to stack a pair of SG500 and connect each client to both using LACP in order to achieve switch redundancy.

Hi there,There seems to be a problem with some switches that it doesn't allow us to change the untagged VLAN in the smartport macro.This causes a problem: if we change it manually when we apply the smartport it works fine but if the switch reboots th...