Switches - Small Business

Hello,We started using these CISCO Smart switches.  We noticed that the management services only allow us to use HTTP, not HTTPS.  Is there a hidden method for being able to use HTTPS or to use SSH/Command line method?Thanks,Wednesday128

HelloI really need help with Inter vlan routing via Kerio Controll 7.4.1. I have several SF300-24P switches (IOS 1.3.0.62) and i have created a several VLAN's.Vlans: Vlan 10, 100, 200 and interface vlan 213 (for management).I can ping hosts in the sa...

Hello,I'm trying to use two STBs behind a SG200-08 with multicast IPTV. Everything seems to work fine after IGMP snooping is enabled and configured but there's still a small anoying problem.When both STBs are playing the same channel and one of them ...

                 Hello, I have modem asi DHCP server and I reserve address for switch 172.16.2.254. I need config this switch as DHCP  client to the server requested the address. Can anyone advise me the steps to set the switchThanksMartin

This is my first time configuring a layer 3 switch. We have an SG300-52. I have setup a vlan for our servers. I have assigned an IP range to the vlan (192.168.1.0/24). I've connected our web server to one of the ports in the vlan. How would I set it ...

This is a pretty simple configuration.  I have six Cisco 300 Series switches in Layer 2 mode.  They are all connected using ports in Trunk mode.  These Trunks are tagged members of all VLANS.I have one 300 series in layer 3 mode with IP address assig...

I am installing this switch to a new departement. The reason of this is to share networks and bring POE over there as we will be istalling VOIP phones next month. We already have a network in place:-Cisco me 3400 from the ISP-Cisco ASA 5510 firewall-...

I am confused by the model numbers and I can't find any information on the V02. Can anyone enlighten me as to the difference between the 2?Thanks

HelloI have a strange problem with a SG300-20 switch. I use check_mk (together with icinga) to monitor this switch using both icmp (check_icmp test) and SNMP. This issue is the same even if just ICMP pings is used for monitoring, so the SNMP part is ...

Hi all,is there a way to find out what kind of SFPs are in an SGE20x0 switch? Both on the GUI and on the LCLI I don't see this information. Thanks in advance, Karsten--  Don't stop after you've improved your network! Improve the world by lending mone...

Hi all, I have bought a SF 302-08MP Switch, thinking that this works like a Switch 2960, ie, I want to configure VLANs and ports TRUNK.But when I connect via console shows me a series of menus that do not allow me to configure the ports to VLAN, or c...