Switches - Small Business

                   hello, want to use the sf100 to isolate the network from multicast protocol will the switch work?  will QoS "block" somedata?

Hi Community,just registered after reading some topics in the last months. Great answers here - thank you for that!No I have a minor issue with a new feature and did not find any solutions yet.Yesterday I upgraded my SG300-10P to firmware 1.2.7.76. I...

Is there a replacement rackmount kit available for a Smart Switch SF200-48?

      I have set  vlan2, vlan3 vlan4, interface setting, port to vlan, port to vlan, mac address and with no mac addressNo acess to e1,e2,e3,e4, what did I miss?Help please           

Hi,I've a script that does the check of port status asking OIDs.1.3.6.1.2.1.17.4.3.1.2.1.3.6.1.2.1.17.4.3.1.1.1.3.6.1.2.1.2.2.1.8after a firmware upgrade, all these OIDs are not available.for example:snmpwalk -v 2c -c public 192.168.1.197 .1.3.6.1.2....

I have learned that by default the ip helper-address will forward the following 8 udp portsUDP PORTCommon Name.69TFTP67BOOTP Client68BOOTP Server37Time Protocol49TACACS53DNS137NetBios138NetBios DatagramBut when I check in cisco SG300-28, only port 37...

i have a SG300-28,i  try to config the DAI of vlan,i found that only 128 can be config in the DAI list.As follow:SG300-9F(config)#ip arp inspection list creat test7SG300-9F(config-arp-list)#ip 172.16.32.254 mac-address 0024.9787.04ff...SG300-9F(confi...

I have another customer again in the restaurant/bar business. We are installing Comcast business class double or triple play (data, voice, video). The modem/router they provide is the SMC SMCDG3-CCR. Like my other installs, the network will consist o...

At our office we have a weird performance problem with the following switches and connectivity:Internet     |SG300-24 (L3) core switch     (in our server room)     |SG300-10P (L2) access swtich     (in our meeting room)     |SG500-28P (L3) switch    ...

I have fiber optics no router One static IP address, when connect SF 200 the system LED flashes and there is conductivity I checked ther is no setting for static ip,Gateway,DNS, so is this unit only for Dynamic address

Trying to find out if a managed switch, such as the SLM2048T can be configured as an unmanaged switch.  Our schools have laptop carts and we want to put switches in the carts so that the laptops will be plugged into the network when not in use and so...

Hi,I have small problem:I need to create  3 vlans:1 vlan will be communication with only GE1 port (Trunk)2 vlan will be communication with only GE1 port (Trunk)3 vlan will be communication with only GE1 port (Trunk)All vlans will not communication to...

Hi,I am trying to order SMB switch SG300-10 for india but unable to identify the exact part code. Is it SRW2008-K9-NA or SRW2008-K9-AU?Any document will be reall helpful.

I have 4 SG300 switches running in their default configuration.  I have a single subnet and have been working just fine.I tried expanding my subnet from a /24 to a /23 but am having trouble communicating between old and new parts of the subnet.  Ping...