Switches - Small Business

Hello,The SMART Designs state that both the ESW500 and 300-series switches should not be used for deployments of over 100 IP phones.But now that both the UC560 can go up to 138 (128 IP phones) and the BE3000 can go up to 300 users is this design rest...

dear allhow shall i use different vlans outside another gateway in sg-300 28?Example:vlan2 192.168.2.0/24 gateway 192.168.2.1 outside router gateway 192.168.2.254vlan3 192.168.3.0/24 gateway 192.168.3.1 outside router gateway 192.168.3.254should me d...

Hi,Currently, I've got an issue with a Cisco SF 300-48P.The ports are configured with the auto smartport configuration.When I connect an IP phone + desktop, the port security feature is enable every time.I don't understand why, because the maximum ho...

Hello,I have an issue with using IGMP snooping on SPS224G4.After some period of using I get such message in log:%BRG_IGMP-W-TABLE_OVERFLOW: IGMP group table overflowAfter a little time after event the switch became uncontrollable.Normal functionality...

Hello,May be somebody can help me. In official information for SG300-28p noise level is 40.6 dB, but in fact its too noisy. Is it possible to change speed of fans? I use only 8 PoE ports.Thanks in advance,Andrey

Hi All,I'm doing some tesing in SFE2000P linksys switch about the TACACS authentication. I have configured the switch accodringly to point my ACS server with key string. Now, I'm able to login into the switch with TACACS account in HTTP/HTTPS only an...

Dear All,I am new at this forum and need help to configure my new SG300-28P.When I have started the switch, I have specified a new password and enabled telnet in order to setup the switch in Layer 3 mode.After a restart, the switch took its IP addres...

Dear Cisco,could you please provide some snmpset commands to add, modify and delete vlan table entries on SG300-10 switches?I checked http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801c6035.shtml however thisinformation is ...

I am attempting to set up a vlan using 2 SLM2024's and a Cisco  asa 5505.  I have performed this operation more times than I can count,  though never with the 2024, and thought I could do it in my sleep.  I am  now baffled.  The firewall and VLAN con...

Hello,I have a switch SRW248G4P  that doesn't work.I already updated the OS (1.0.1 ,  1.0.2 , 1.3.1), and it always stop at the same part/message (Enter Transition mode...) during the boot.The message at boot from the serial port is as following:----...

Guys, I'm working on a home automation project with 3 SGE 2000P's. I think there are some configuration issues that's slowing down the network BIGTIME. I have all 3 in standalone mode, on static IP's, and every port with autonegotiation DISABLED runn...

I know that the SG200 series has VLAN support but was wondering it would support VLAN routing within the switch itself.Hypothetically if I wer eto configure the ports as following:Ports 1-10 on VLAN 1Ports 11-20 on VLAN 2Ports 21-30 on VLAN 3Can devi...