Switches - Small Business

HiBrand new SG300-20, every now and then on console12-Nov-2011 23:35:33 :%HAL_config_phy-I-CHNGCOMBOMEDIA: Media changed from copper media to fiber media (Unknown) on port gi19.12-Nov-2011 23:35:33 :%HAL_config_phy-I-CHNGCOMBOMEDIA: Media changed fro...

I'm completely new to VLANs, and I have a client who has a SG300-20 switch. This location is basically a shared office space with individual offices inside a large building. Each office has network ports that lead back to a patch panel, which then is...

HiA customer of mine is having serious problems with several ESW-500 switches.He started a discussion under Netpro, but haven't received any answers. This might be the right group?He wrote:I have two new esw-540 switches (one 48 port  and one 8 port)...

My customer has an SR2016 device which has never really worked consistantly.  They were assured that they would always be able to upgrade it to a comparable Cisco unit, if they wanted to.  When I told them that the program appears to have ended they ...

Originally, my  client had SG300-28 (purchased by mistake) instead of SG300-28p. I had  configured SG300-28 from CLI and CCA (CCA is a requirement for the Small  Business Pro department to support the voice solution). I then tftp'ed  the config to my...

Hi,Does the SGE2010 switch support multicast traffic accross different vlan on the switch? Thanks.I had create a vlan1 on port 1 to 10 and another vlan2 on port 11 to 20. When i try to route the multicast traffic from vlan1 to vlan 2 but it is unsuce...

Hi,we are trying to do an automatic backup of our switches config trough snmp.my script can easily backup cisco 2950-2960-3550-3560 using snmp.but I dont know the mib to use to backup the cisco small business serie 300 switches.if someone could point...

I have a SF300 24 P and Iam trying to configure a voice vlan this is what I have done so far and it doesnt work.1. create vlan 30 for voice traffic and enable it2. Telephony OUI add my mac address for allworx phones3. Port to VLAN add 30 has tagged, ...

Hi,Fromhttp://www.cisco.com/assets/sol/sb/Nikola_GUI/SG_300-28P_v1_1/config/home.htmIP Configuration > Management and IP Interfaces > IPv6 TunnelI would like to know how i can use this?.If i enable isatap on switch and a successful connection with is...

Why does the sx300 series only displays ping and traceroute results in 20ms intervals (see below)? The example in the CLI manual shows "regular" results. These 20ms intervals are not helpful for troubleshooting.  This is version 1.1.0.73 on an sf300-...