Switches - Small Business

hellow,I bought 3 switches (gs 300-28 ports)and i need to connect them to my network, when all the switches are cisco 3560g, with vtp on the vlans.my question is, how to creat vlans on this switch? and Is it possible to make the gs300 learn the vlans...

Hi I am trying to set up the SG300-52 and am struggling, I have a domain controller with IP address 192.168.0.1I have a broadband router that is has a dynamc ip address. I have set up vlan1 aand vlan2Vlan1 is getting its ip address from the domain wh...

Hi,We have 3 SGE2010P all set up as layer 2 switches with no DHCP, no VLAN configuration. They are just acting like switches. We are a small office of about 100 people so there is no need for me to configure anything on the switches. I have a problem...

Running the newest firmware available$ show version SW version    1.1.2.0 ( date  12-Nov-2011 time  23:34:26 )Boot version    1.0.0.4 ( date  08-Apr-2010 time  16:37:57 )HW version    V01This is how I can cause the reboot to happen every time. Please...

Hello there.I may be dull, but I couldn't find it on my own. Hence, I would like to know where can I find the changelog for the 1.1.2.0 firmware. Or at least get some information here Thanks.

Hi folksI use the SLM2024 in the office at home and finally I decide to seek if I can do something about the fan noise from the unit.  Otherwise the switch is perfectly fine.Can I ask please;1)  - Can I swap out the stock fans for quieter ones?  (Any...

We have a single SG300-28 in L2 mode with 1.1.1.83 vlans 3 virtual interfaces and 1 parent interface configured on the sonic firewallSwitch(trunk allow all)-->sonic( 1 parent interface and 3 virtual IP's)vlan 10  192.168.10.1vlan 20  192.168.20.1vlan...

HiA year ago I bought this new switch for a small business.  I just plugged it in unmanaged mode and all was well. Everything was running internally at 1GBs speed.    About a month ago the clients complained about network speed. I checked the Local A...

We have a fairly new SFE1000P switch whose power supply died.  Does anyone know where I can order a replacement from?  The information from the power supply is as follows:Model No: AD  48/3.125150W AC  AdapterModel: DPSN-150JB B  Rev  S8.0Input: 100-...

hi, On a SF300-08, is anybody knows how to work with CLI and not with the Console Menu Interface ?Thank you for your help.Pascal Linglin

Hi All,I am new to Cisco managed switches and just purchased 2 SF-300 48 port units for 2 customers.  I want to be able to remotely manage them over the Internet with my browser.  BUT, customer sites already use port 80 for web servers.  So, how do I...

Hello Guys,I need to clear some things with regards to Cisco SGE2000P switch, like1)what is meant by Four SFP slots (shared with four copper ports) for Fiber Gigabit Ethernet expansion(datasheet).2)Does this switch offer auxillary vlans?I havent used...

I have a stack of SGE2010P switches with 3 vlans (1, 10 and 255) on it. Connected to it via a trunk port, I have a SF300-24P.On the trunk ports, I have vlan 1 untagged, vlans 10 and 255 tagged (on both sides, obviously).On the SGE2010 stack, I can se...

Hi All,Would you be able to advise if SRW2048-K9-AU is currently orderable in Australia? We cannot seem to find this on any price list.Kind regards,Wendraso