We recently announced the release of our self-serve virtual assistant. You can read the full announcement here. Videos and documents are available within a click for our latest products. Once you've told the bot what device you're using, the context ...
Forum Posts
(Updated September 2023 - Added Catalyst 1200 and Catalyst 1300 ) Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Catalyst 1200 & 1300 Hardware Install...
I have a cisco switch model sf300-24pp recently I had power outages which caused the switch to shut down unexpectedly. when I started the switch I noticed that its LED indicators of its ports do not turn on and the system LED is shown flashing green....
Resolved! Power up an SG200-08P as a PD
Hello,I got a used Cisco SG200-08P switch missing its power supply. To check if the switch is still in working conditions, I tried to power it up with a PoE injector connected to port 1 without success. I was wondering if this is conclusive evidence ...
I was told that I need to setup VLAN for my VOIP phone. On my SonicWall firewall, I setup a separate VLAN 10 with it's own DHCP server. I was told that on the SG300 each switch port that the phone is plugged in I need to set up to untag VLAN 10 and...
Hello,I'm working on cisco SG300 switch, after collecting traffic data (received octets) from it using snmpget I got this graph: 1.The drop of data from the maximum value may be due to drop in user activities, is there any other reason for this rapid...
Hi all.I will open a case in TAC, but i found out a bug in latest SF 220 Firmware 1.2.0.3.Let's say you want to restrict access to the switch using Management Access Profiles & Rules.I'm allowed to write a new rule, let's name it #1, Allow All manage...
For some reason, I'm no longer able to access my SG 300 switch web interface. Is there a way to get it back? or do I have to factory reset the switch?
Hello,BPDU Guard feature is not supported in version 1.3.0 of Cisco SW (SG200-50 ), I need to know please if it is supported in the lastest versions ? 1.4 for example ?If so, which version is the most recommended ?Switching, WANSwitching, WAThank you...
hI all a very simple configurations ... bought 10 smb sg-300 28mp switches . every thing goes fine in vlan configuration, port assigning .. but when I try to assign ip to one of the created vlan interface switch hangs GUI or CLI. Layer 3 is enabled. ...
Is there any access switch with 802.17 (RPR) support? Thanks Pablo Quevedo
Dear All, Hope u are doing well. I have SG250 26POE, daily when i tried to take Telnet/SSH session it denied my access and also the "SH IP ARP" also not resolved. Further i m getting MAC address against that connected port and also getting SW details...
Hi everyone.I'm trying to display VLAN information from each switch interface on a software control system we use. Looking at the supplied MIBs, the untagged vlans are available here:1.3.6.1.4.1.9.6.1.101.48.62.1.1... which works perfectly.It looks l...
Hello All. Please, I need help with this. I need to view which VLANs are on a trunk port and know which are tagged or untagged in the Cisco SG350X. What OID give me that information? Thanks.
Resolved! Scrambled PoE status on sg350x-24P
I have run into something odd and cannot seem to clear the error. This is a sg350x-24p unit with latest firmware. The LED status for PoE is showing up on incorrect ports. This is also true in the web interface. Under PoE settings, the ports show inco...
Hi,QoS Egress per shaping configuration at Cisco SF300/24 here Four (4) Queue Egress shaping 1,2,3,4 but why this Queue 1,2,3,4 and where to use?I am using each per port 6Mbps and Queue Egress shaping 1,2,3,4 use 6Mbps, 5Mbps,3Mbps, 2Mbps, it's work ...
alguien sabe si en algun momento se habilitara algun servicio cloud para los switches cisco small bushines, o series SG.para poder administrarlos de manera remota. algo tipo cloud?? perdon por la referencia pero algo asi como aruna instanton. saludos
