Cisco SG110-16HP switch POE spec

[Alucidnation]

Hi all,

I seem to have a bottleneck with my Linksys poe+ switch, so i am looking at replacing it with the 

Cisco SG110-16HP

However, looking at the spec, it seems that it only support POE (af) and does not support POE+ (at)?.

Is this really the case, as i have seen online at various retailers that it is yet the cisco specs says otherwise?

http://www.broadbandbuyer.co.uk/products/22150-cisco-smb-sg110-16hp-uk/

Thanks for any help.

[devils_advocate]

This is from the Data Sheet:

Ports

10/100/1000 Ethernet, with support for 802.3af PoE, power port for AC adapter or power cord

There is no mention of PoE+ in the Data Sheet, therefore I can only assume its not supported.

As much as the Cisco Data Sheets may have the odd error, I would rather trust those than a vendor/reseller website.

The Data Sheet also says:

Power over Ethernet (PoE)

Model Name SF110D-08HP SF110D-16HP SG110D-08HP SG110-16HP SG110-24HP

Power Dedicated to PoE 32 watts 64 watts 32 watts 64 watts 100 watts

Number of PoE Ports 4 8 4 8 12

64 Watts with 8 ports means a Maximum of 8w per port assuming all 8 ports in use.

My feeling is that PoE+ is not supported based on this. 

[Alucidnation]

Hi, yes i ddid wonder.

Do you knowif Cisco do a 16P POE+ switch?

I would like to use POE+ as this will mean my access points (2702) will get full power.

Thanks

[devils_advocate]

Look at the SG300/SG500 range.

Something like the SG300-28PP which gives 180w and supports PoE+

http://www.cisco.com/c/en/us/products/collateral/switches/small-business-smart-switches/data_sheet_c78-610061.html

[Alucidnation]

Ok thanks, ill look into those.