cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1052
Views
0
Helpful
1
Replies

Cisco SG200 Data and Voice Vlans

Ben Rodriguez
Level 1
Level 1

Hello Support Community,

I'm trying to figure out how to configure the ports on a Cisco SG200-8P for data and voice vlan.

Whereas, the enterprise grade equipment offers command line and does not require any fiddling with GUI, I'd like to accomplish something simple as

 

interface GigabitEthernet0/1
switchport access vlan 30
switchport mode access
switchport voice vlan 25

 

Can someone show me the ropes on the SG200 to accomplish the same.

The article I found here leads to a deadend

 

 

1 Reply 1

Sujoy Paria
Cisco Employee
Cisco Employee

Hi,

You can follow the below mentioned link (Chapter 14 [VLAN Management], page 177) onwards to configure the mentioned VLAN settings on the Switch port…

https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbss/sf20x_sg20x/administration_guide/Cisco_200Sx_v1_4_AG.pdf

In case still you are facing any problem to configure the VLAN on the mentioned Switch then you can open a service request with us by contacting our CIN, you can get the contact number details for your region on the following link…

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Switch products supported in this community
Cisco Business Product Family
  • CBS110
  • CBS220
  • CBS250
  • CBS350
Cisco Switching Product Family
  • 110
  • 200
  • 220
  • 250
  • 300
  • 350
  • 350X
  • 550X