02-24-2020 09:34 PM
Hi,
Can someone pls share their knowledge or experience in configuring sntp server for sg220.
I have anabe sntp server then added sntp server (internet) name as
sa.pool.ntp.org
Is it correct ?
02-25-2020 02:37 AM - edited 02-25-2020 02:37 AM
thats valid NTP server, check is that your region and near by to your network? make sure your switch able to resolve the DNS names.
02-25-2020 12:05 PM
Hi , the manual time set is getting reset whenever i reboot of power off the switch.
I am saving config , even then time date resetting
02-25-2020 02:20 PM
once save the config, did you go back and see the config is saved as per your change.
check here for last steps to save the config.
10-22-2020 03:00 AM
Hi Balaji,
You were right that as DNS not configured correctly the NAT website could not be resolved.
I change it to IP address and SNTP started working.
Kindly advise about DNS, what should I configure so as web names can be resolved. What should I enter in domain name system. There is no dedicated dns server, so shall I point 8.8.8.8
10-22-2020 05:46 AM
if you do not have any DNS Server - i use google DNS 8.8.8.8 or 8.8.8.4.4 to work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide