Cisco SG500-52P has VLAN settings still in place but acting as if they are not there
I have Cisco SG500-52P switches. I have a switch that I have split into 2 VLANS, ports 2-24 are on VLAN 2 and 25-48 are on VLAN 4. The problem is with the VLAN 4 ports, my settings have not changed on the VLAN 4 ports, however, they no longer have access to the internet plus they receive a 169.X.X.X ip address. The VLAN 4 ports are supposed to have an IP address starting with 172.27.X.X and connect to the internet. Has anyone seen this before?
Re: Cisco SG500-52P has VLAN settings still in place but acting as if they are not there
I'm attaching screen shots. This set up worked before but the issue now is I can't get to the internet through this switch. Pinging google doesn't work. It is uplinked to a Meraki switch and the uplink port seems to be working on the Meraki switch so I'm pretty sure it's this SG500 switch, although, I can't find where any settings have changed.
Cisco RV340 Series Secure Router
Security License Features and Performance
Today, secure networking is imperative for every business, even the smallest one. The RV340 series security routers provides business users with advanced connectivity and...
This document is attempt to recreate content of original document created by famous @Patrick Born. Cisco has considered to destroy such valuable document for an unknown reason.In order to capture debug and syslog messages from your SPA1x2 and SPA232D phon...
The Cisco RV340 Series of VPN routers and Cisco AnyConnect Secure Mobility Client
The RV340 Series consists of the models: RV340, RV340W, RV345, and RV345P and they support remote access tunnel termination of the best sel...