ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


2510
Views
0
Helpful
1
Replies
Highlighted
Beginner

Gbic SFP Module doesn't work with SFE2010

Hi All,

Have a question, we have installed 2 SFE2010 via Fiber, i notice that there is no link acttivity on the switch, I have tested the fiber with Dlink Media Convertor and it works. I really need help on this. What do i do ? i have tested with 1 side SFE2010 and the other side Media Convertor. It doesnt work. Do i need to enable the SFP port manually, by default is enabled. Fiber is a multimode. so is there SFP and there Media Convertor

Regards

Joel

1 REPLY 1
Highlighted
Cisco Employee

Re: Gbic SFP Module doesn't work with SFE2010

Joel,

You have not provided lots of specifics about the SFP modules in question. Some 100 Meg SFPs require you to manually set the port speed in the GUI before the SFP will be recognized, so you can try that. Otherwise, suggest you open a case with the Support organization. The contact numbers can be found at the following link:

http://http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Ivor