help IP routing VLAN on SF300-24

[nguyenquynhson363]

I had made a DHCP server that had many scope:

1- scope: 192.168.1.208/28

2- scope: 192.168.1.224/28

3- scope: 192.168.16.0/24

and DHCP server : IP address: 192.168.16.1

so we config SF300-24 with 3 VLans

1- VLan2: IPv4 address: 192.168.1.222

               subnetmask: 255.255.255.240

2- VLAN3: IPv4 address: 192.168.1.238

              subnetmask: 255.255.255.240

3- VLAN4: IPv4 address 192.168.16.254    

                subnetmask: 255.255.255.240

How to condig SF300-24 to vlan 2 vlan 3 can get IP address from DHCP server in VLan 4?

Could you help me?

Thank!

[Antonio Ricciardiello]

Hi!

I have this problem too, configuring routing intervlan on SF300 Switch whith layer 3 mode enabled...

ip routing command is not recognized, and ip route command return

"gateway cannot be one of the addresses configured on this device"

Could you help me?

Thanks a lot!