cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


1103
Views
0
Helpful
2
Replies
abdiel.pema
Beginner

How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

1 ACCEPTED SOLUTION

Accepted Solutions
nijamudeen_aziz
Beginner

restore  the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

View solution in original post

2 REPLIES 2
Pratheep Kumar K
Beginner

Hi,

Take a paper clip,hold the reset button for 30 seconds then try to access the web interface. It will work.

nijamudeen_aziz
Beginner

restore  the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

Create
Recognize Your Peers
Polls
How would you describe your level of technical expertise?