cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1295
Views
0
Helpful
2
Replies

How to create a static ARP using SNMP ?

Liok_3187
Level 1
Level 1

Hi

I want to create a static ARP using SNMP.

I can delete a ARP by setting oid '1.3.6.1.2.1.4.22.1.4' to '2' .

But neither of

      '1.3.6.1.2.1.4.22.1.1'  

      '1.3.6.1.2.1.4.22.1.2'  

      '1.3.6.1.2.1.4.22.1.3'  

      '1.3.6.1.2.1.4.22.1.4'  

      can be modified or created

snmp-server community is RW

I can modify other oid, for example 'sysName' oid 1.3.6.1.2.1.1.5.0

I used this command to create a new ARP :

     snmp set v2 192.168.10.1 private oid 1.3.6.1.2.1.4.22.1.1 integer 1

the response:

     SNMP Response: reqid 16, errstat 11, erridx 1

      ipNetToMediaEntry.1 = 1

errstat 11 is NOCREATION

And I used the tool 'Mib Browser' to set a static a ARP,

the response is NOCREATION too.

I searched a lot of time, many people have this problem,

someone said the oid ipNetToPhysicalPhysAddress or inetCidrRouteTable is alternative,

but our switch haven't these oids.

I can't find a solution.

I want to know whether the task can be completed.

please help.

Regards

1 Accepted Solution

Accepted Solutions

jeffrrod
Level 4
Level 4

Dear Fu,

Thank you for reaching the Small Business Support Community.

I am not positive this can be accomplished on the Small Business Switches, however, what is your switch model and firmware version so I can investigate further.

I'll be looking forward to your reply.

Kind regards,

Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer

*Please rate the Post so other will know when an answer has been found.

Jeffrey Rodriguez S. .:|:.:|:. Cisco Customer Support Engineer *Please rate the Post so other will know when an answer has been found.

View solution in original post

2 Replies 2

jeffrrod
Level 4
Level 4

Dear Fu,

Thank you for reaching the Small Business Support Community.

I am not positive this can be accomplished on the Small Business Switches, however, what is your switch model and firmware version so I can investigate further.

I'll be looking forward to your reply.

Kind regards,

Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer

*Please rate the Post so other will know when an answer has been found.

Jeffrey Rodriguez S. .:|:.:|:. Cisco Customer Support Engineer *Please rate the Post so other will know when an answer has been found.

Dear Jeffrey,

Thank you for your answer.

We talked with cisco support team.

Finally, their said that it is a bug and can't be resloved now.

anyway, thank you.

Regrads

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Switch products supported in this community
Cisco Business Product Family
  • CBS110
  • CBS220
  • CBS250
  • CBS350
Cisco Switching Product Family
  • 110
  • 200
  • 220
  • 250
  • 300
  • 350
  • 350X
  • 550X