02-19-2012 05:51 AM
Hello,
We connected 4 wireless access points (AP541N-E-K9) to an SG300-10P switch.
We want to be sure that no wireless clients can alter settings to the network by connecting to any of the networking devices. We also want that no wireless devices (except a few) can connect to computers that are on the wired network.
I'm new to configuring networking devices so I would appreciate a step by step guidance to set up the switch for this.
We already added all the MAC-adresses of all the wireless devices (that are allowed to use the wireless network) to the access points.
Thanks already for your reply.
Wim
02-20-2012 08:47 AM
Wim,
Look in the administration guide and their are step by step on how to create vlans -page 178
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/78-19308-01.pdf
After attempting to configure the switch and run into problems you can give us a call @ 1-866-606-1866 and open a support case
Jasbrayn
03-06-2012 08:15 AM
Do you have number to call to in Belgium?
Sent from Cisco Technical Support iPad App
03-06-2012 08:22 AM
All Support numbers Click on link and this should take you to Cisco Small Business Support Numbers
Jasbryan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide