cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


2444
Views
0
Helpful
2
Replies
Highlighted
Beginner

MGBLX1 compatibility Sw 2960X

My question is if the SFP MGBLX1 is compatible whit a Cisco Sw 2960X Thanks.
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Enthusiast

Hello,

The MGBLX1 is meant for use with the Small Business line of switches.  From looking over the SFP compatibility matrix the 2960X will not support the MGBLX1.

If you are trying to connect from a MGBLX1 on a Small Business switch going to a Catalyst, the SFP on the Catalyst should be a GLC-LH-SM.  That info came from the Small Business to Enterprise SFP Compatibility chart.

Hope that helps, and thank you for choosing Cisco,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

*please rate helpful posts*

View solution in original post

2 REPLIES 2
Highlighted
Enthusiast

Hello,

The MGBLX1 is meant for use with the Small Business line of switches.  From looking over the SFP compatibility matrix the 2960X will not support the MGBLX1.

If you are trying to connect from a MGBLX1 on a Small Business switch going to a Catalyst, the SFP on the Catalyst should be a GLC-LH-SM.  That info came from the Small Business to Enterprise SFP Compatibility chart.

Hope that helps, and thank you for choosing Cisco,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

*please rate helpful posts*

View solution in original post

Highlighted

I have similar scenario.. however i am thinking of connecting my SG200 (MGBLX1) to the L3 switch 3850 (GLC-EX-SMD). Is this possible to have one end of the fiber different from the other end?

Thank you