I'm trying to find proper OIDs to get status information from SF300-24 24-Port 10/100 Managed Switch.
On official documentation I see this:
Object portAdminSpeed
OID 1.3.6.1.4.1.9.5.1.4.1.1.9
when I try to snmpwalk it I 'm getting an error:
SNMPv2-SMI::enterprises.9.5.1.4.1.1.10 = No Such Object available on this agent at this OID
I did full SNMP walk for 1.3.6.1.2.1 OID and tried to find anything about Port Speed there.
Found ifSpeed and ifHighSpeed. Theylook fine, but they don't really show AdminSpeed, but instead theuy show max possible spped I think (I changed admin speed from 100 to 10, wrote to mem, but still see 100 speed on both found OIDs).
Please advise.
P.S.: Found needed OIDs after reading proper MIBs for this switch (got them from Cisco engineer by request, and afterwards found same MIBs in downloads section for the seitch). Googled these MIBs and found OIDs on Cisco forum:
Speed: 1.3.6.1.4.1.9.6.1.101.43.1.1.15
Duplex: 1.3.6.1.4.1.9.6.1.101.43.1.1.3
Now I want to find OIDs for getting vlan database, switchport access/trunk mode and uplink detection.
P.P.S.: Found OIDs for reading vlans on ports.
The current problem is - I can't modify VLAN list. Created another thread.
