09-06-2012 11:21 PM
Hello,
Good Day. I would like to ask the correct part number of the power adapter on WAP4410N?
Thanks,
Solved! Go to Solution.
09-06-2012 11:34 PM
Hi Roy, there is not a part number available for the WAP4410N. The device does use 12 volt, 1 amp adapter.
The only power adapter sku there is, is for the SPA phones which is the PA-100-xx, the 5 volt, 2 amp adapters.
-Tom
Please rate helpful posts
09-07-2012 12:04 AM
Rey, the original package content contains the adapter. You may try to call sbsc requesting an adapter. In the past we have had customers have a rma processed, remove adapter and return the replacement device.
09-06-2012 11:34 PM
Hi Roy, there is not a part number available for the WAP4410N. The device does use 12 volt, 1 amp adapter.
The only power adapter sku there is, is for the SPA phones which is the PA-100-xx, the 5 volt, 2 amp adapters.
-Tom
Please rate helpful posts
09-06-2012 11:41 PM
Hi Thomas,
So that would mean the power adapter is not orderable from Cisco. Chances are client will use a third party power adapter that would meet the specifications of the original power adapter.
Thanks,
09-07-2012 12:04 AM
Rey, the original package content contains the adapter. You may try to call sbsc requesting an adapter. In the past we have had customers have a rma processed, remove adapter and return the replacement device.
09-07-2012 12:37 AM
Hi Thomas,
Thank you very much for your assistance. We will coordinate with our team here so as to assist the client.
Best Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide