Hello
I have this setup on a Cisco switch port:
interface fastethernet24
storm—control broadcast enable
storm—control broadcast level 10
storm—control include—multicast
port security max 10
port security mode max—addresses
port security discard trap 60
spanning—tree portfast
switchport trunk allowed vlan add 18
switchport trunk native vlan 301
macro description ip_phone
!next command is internal.
macro auto smartport dynamic_type 1p_phone
the VLAN 18 spreads a connection to a PBX. When it falls, the Alcatel 4028 restarts and passed my port in VLAN 1. How is this possible?
