Problem with DHCP

[mmalaoui]

Hello,

I created 4 VLANS in my switych cisco SF300-48PP
the switch is connected to a 192.168.1.1 ADSL router
VLAN 1 address 192.168.1.6 DHCP 192.168.1.7-192.168.1.63 / MASK 255.255.225.192
VLAN 2 address 192.168.1.65 DHCP 192.168.1.66-192.168.1.128 / MASK 255.255.225.192
VLAN 3 address 192.168.1.130 DHCP 192.168.1.7-192.168.1.190 / MASK 255.255.225.192
VLAN 1 address 192.168.1.192 DHCP 192.168.1.193-192.168.1.250 / MASK 255.255.225.192

My problem what I have the internet only in the VLAN1 not in the others

Cordially

[balaji.bandi]

So you confirmed all working as expected ? i did not get last post - is this measn your issue is solved ?

[reforo]

Hello good day,
sorry for my English.
I have SG350X-24, and I also have Vlan 1 with internet connection, but the other vlan 2,3,10, (etc)
they do not have internet connection ..
I'm following the thread because I have the same problem.
Thank you

[Kasun Bandara]

can you share switch routing details and switch running mode (l2 or l3)?

[reforo]

this is the configuration that I followed
My IP router 172.22.0.1
and that of the IP switch 172.22.0.2

Switch-Cisco-01#configure terminal
Switch-Cisco-01(config)#interface vlan 1
Switch-Cisco-01(config-if)#ip address 172.28.0.1 255.255.0.0
Switch-Cisco-01(config-if)#no shutdown
Switch-Cisco-01(config-if)#exit
Switch-Cisco-01(config)#interface vlan 10
13-Dec-2018 20:52:42 %LINK-I-Up: Vlan 10
Switch-Cisco-01(config-if)#ip address 172.19.0.1 255.255.0.0
Switch-Cisco-01(config-if)#no shutdown
Switch-Cisco-01(config-if)#
Switch-Cisco-01(config-if)#exit
Switch-Cisco-01(config)#interface vlan 20
13-Dec-2018 20:53:25 %LINK-I-Up: Vlan 20
Switch-Cisco-01(config-if)#ip address 172.20.0.1 255.255.0.0
Switch-Cisco-01(config-if)#no shutdown
Switch-Cisco-01(config-if)#exit
Switch-Cisco-01(config)#interface vlan 30
13-Dec-2018 20:54:09 %LINK-I-Up: Vlan 30
Switch-Cisco-01(config-if)#ip address 172.30.0.1 255.255.0.0
Switch-Cisco-01(config-if)#no shutdown
Switch-Cisco-01(config-if)#exit
Switch-Cisco-01(config)#13-Dec-2018 20:55:06 %AAA-I-CONNECT: New http connection for user cisco, source 172.28.0.10 destination 172.28.0.1 ACCEPTED
13-Dec-2018 20:56:53 %LINK-W-Down: te1/0/2
13-Dec-2018 20:57:00 %LINK-I-Up: te1/0/2
13-Dec-2018 20:57:04 %STP-W-PORTSTATUS: te1/0/2: STP status Forwarding
Switch-Cisco-01(config)#interface te1/0/2
Switch-Cisco-01(config-if)#no switchport
Switch-Cisco-01(config-if)#ip address 172.22.0.2 255.255.0.0
Switch-Cisco-01(config-if)#no shutdown
Switch-Cisco-01(config-if)#exit
Switch-Cisco-01(config)#ip route 0.0.0.0 0.0.0.0 172.22.0.1
Switch-Cisco-01(config)#end
Switch-Cisco-01#copy running-config startup-config
Overwrite file [startup-config].... (Y/N)[N] ?Y
13-Dec-2018 21:02:38 %COPY-I-FILECPY: Files Copy - source URL running-config destination URL flash://system/configuration/startup-config
13-Dec-2018 21:02:40 %COPY-N-TRAP: The copy operation was completed successfully
Copy succeeded
Switch-Cisco-01#

[Kasun Bandara]

what is the switch mode configured? also have you added incoming routed from your router to inside switch?

[mmalaoui · Accepted solution]

Problem solved, it was necessary to put back the mask of the Modem ADSL with 255.255.255.0 thanks for everyone cordially