Hi there,
Can anyone shed any light on how-to approximate the following IOS QoS configs (from one of our 800 series ISRs) on an SG 300 switch:-
class-map match-any VoIP
match protocol rtp
match protocol sip
class-map match-any RDP
match protocol ms-wbt
!
policy-map QoSPolicy1
class VoIP
set ip precedence 5
bandwidth 256
class RDP
set dscp ef
priority percent 50
class class-default
fair-queue
set ip precedence 0
I would prefer to configure via SSH than the web UI. The policy-map would need to be applied to the out on interface GE28 (uplink to our ISP's gateway).
Thanks,
Trent