cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


19325
Views
34
Helpful
10
Replies
rcoote5902_2
Explorer

"default interface" equivalent for SG300/500 switches?

Can anyone tell me if there is an equivalent CLI command to reset an interface configuration to default?

In IOS it is "default interface <interface>" which removes all configuration from that switch port. I don't seem to be able to find the same in the SG series CLI.

Thanks,

Rob

10 REPLIES 10
chrebert
Enthusiast

Hello Rob,

There isn't an equivalent command on the SG series switches, but I will be bringing it up as a feature request, because it would be quite useful.

Until then the only way to reset a port would be to use all of the no versions of the commands, which I know can be a bit of a pain.

Thank you for choosing Cisco,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

*please rate helpful posts*

hello please had you luck with that feature request? was it accepted by management? We are missing such feature on SG switches as well. thanks!

Hello,

We'll check with the switch product team.

Thanks.

 

Yiu Kay Lee

 

Concentrix at Cisco

.:|:.:|:. CISCO | Yiu Kay Lee | Network Engineer | SMB Presales | yiulee@cisco.com

I have this difficulty in performing the same procedure.

Default ports

Does cisco have any feedback on this topic?

CISCO SERIE GS300

DON'T HAVE -> (DEFAULT) INTERFACE GEXX

att,
JODSON MARTINS

any news?

hard to believe that default is missing

BR

Hello,

Was informed that default interface CLI command feature is not in the road-map.

Thanks.

 

Yiu Kay Lee

 

Concentrix at Cisco

.:|:.:|:. CISCO | Yiu Kay Lee | Network Engineer | SMB Presales | yiulee@cisco.com

Here we are 3 years later. Can we get it on the roadmap? The No commands unfortunately don't clear all the garbage automatically created.

Please add this command !

When to expect this feature? :(

rajp
Beginner

use this command : no macro auto smartport