cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


1422
Views
0
Helpful
3
Replies
bryanlin84
Beginner

Regarding SGE2000 Transceivers

                   please advise can MGBSX1 transceivers use on SGE2000? what type of transceivers can be use on SGE2000.

Rgd

bryanb

3 REPLIES 3
Tom Watts
Advisor

I don't have a compatibility matrix for the SGE, however, the MGBSX1 is compatible. The MGBLX1 and MGBT1 also works. I have used those 3 in my lab.

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

according to: https://supportforums.cisco.com/discussion/10932321/gbic-module-sge2000 and manual: https://supportforums.cisco.com/sites/default/files/legacy/2/0/4/68402-Linksys-SGE2000-Manual.pdf

"Use the Linksys MGBT1, MGBSX1, or MGBLH1 mini-GBIC modules
with the Switch. The MGBSX1 and the MGBLH1 require fiber cabling
with LC connectors, while the MGBT1 requires a Category 5e Ethernet
cable with an RJ-45 connector."

Also I'm using two SGE2000 with all SFP ports with MGBSX1 modules (multimode) - without any problems.

danielrenteria
Beginner

I found this document which validate that Tom said.

http://www.cisco.com/c/dam/en/us/td/docs/interfaces_modules/csbna/mgb/quick_start/guide/Optical_Module_QSG_en-US.pdf

Best regards,

danielrenteria