cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1016
Views
0
Helpful
3
Replies

RV320 Private LAN Address Range

fmarshall3
Level 1
Level 1

I tried to set up an RV320 using 172.30.2.0/24 on the LAN - which is in the private address range of 172.16.0.0 – 172.31.255.255

I got the impression that it didn't or wouldn't work as I'd tried it more than once.

Using 192.168.111.0/24 did work right away.

 

Is this a limitation on the RV320?

1 Accepted Solution

Accepted Solutions

kstiwari
Cisco Employee
Cisco Employee

Hello,

 

Thanks for your query.

 

I have attached screenshots for RV320 where I changed the pool for the network ID you suspect to be problematic i.e.172.16.2.0/24

 

Cross check the version once you are on.I tested on a later version though. But i think it wont be causing a problem.

 

Reset the device and check if you are able to make the changes

 

Regards,

K**bleep**ij Tiwari

View solution in original post

3 Replies 3

kstiwari
Cisco Employee
Cisco Employee

Hello,

 

Thanks for your query.

 

I have attached screenshots for RV320 where I changed the pool for the network ID you suspect to be problematic i.e.172.16.2.0/24

 

Cross check the version once you are on.I tested on a later version though. But i think it wont be causing a problem.

 

Reset the device and check if you are able to make the changes

 

Regards,

K**bleep**ij Tiwari

Did DHCP work?  I also tried it and it appears it all works, including DHCP.

 

Thanks!

fmarshall3
Level 1
Level 1
We resolved it. Thanks for the support!