SF300-24p Q-in-Q - Changing from vlan 4095

[ChrisSanderson7]

I have a Cisco SF300-24P deployed at a customer prem running only a couple VLAN's - 1 customer related and 1 for management.  Recently the customer inquired about changing his connection to Q-in-Q.  I have changed the interface type to customer but then it selects vlan 4095 as the vlan associated to that port.  How do I change that vlan or by default is that the only vlan I can use?  Currently the customer is using vlan 904 and would like to continue to use that vlan in the Q-in-Q config.

[Tom Watts]

Hi Christopher, I didn't run in to this problem at all.  Please reference the 2 screen shots below. 4095 is a reserved PVID when a native vlan is not associated to the port.

-Tom
Please rate helpful posts