06-24-2019 11:15 AM
Trying to connect some POE IP cameras via Cat6 cable, but not able to power these cameras when connected to the SG110D-08 switch. Switch came with a small AC power adapter "Model: DSA-12PF-12FUS 120100" and "Output: +12V at 1A" to power the unit. Is there a bigger power adapter to power the switch along with connected cameras; if so, what's the make and model number? At this time, these cameras only work when a separate external power source. Thanks
06-24-2019 07:52 PM
Hi,
Thanks for your post.
Kindly let me know the complete product ID of switch like SG110D-08HP.
As per Sx110 series switches SG110D-08HP switch comes with 4 POE ports and supports 802.3af PoE.
Kindly confirm with camera model also support this "802.3af POE".
Sx110 serial datasheet:-
Regards,
Mridul
Cisco SBSC
06-25-2019 12:48 PM
Model # SG110D-08-NA
06-25-2019 12:56 PM
no information on IP camera other than supporting "48-54v Poe or Poe NVR or Poe switch.
06-26-2019 01:22 AM
Hi,
Kindly let me know the complete IP camera product ID, so that can check with the data sheet of that specific IP camera model.
The best i can suggest is kindly request you to open a service request with us by calling our frontline team
Link:- https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Regards,
Mridul
Cisco SBSC
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: