SG200-18 - Validating User-logins and 802.1x via Radius (Cisco ACS)
In our environment we've got a Cisco ACS-Server providing Tacacs+ (mainly for access to routers/switches) and Radius (for 802.1x-validating end hosts) services.
Aside from our IOS-based switches we've got a SG200-18 acting as a workgroup switch.
I'd like to set up user authentication on the SG200 (i.e. authentication of users accessing the switch) as well as 802.1x validation of end hosts via our existing Cisco ACS 5.x.
Unfortunately the docs for the SG200 in the chapter "Configuring RADIUS Parameters" only mentions "...For the RADIUS server to grant access to the web-based switch configuration utility, the RADIUS server must return cisco-avpair = shell:priv-lvl=15.... - no examples etc.
Since the WEB-based SG200-interface is absolutely new to me I'm looking for some hints/examples on how to set up the Cisco ACS Radius Server in order to interact with the SG200.
Welcome back for issue number 2 of the small business support community newsletter. Over the coming months we're going to share exciting news on the hardware and support community side. For now, we'll highlight our new favorite docs, pertinent...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Cisco is excited to offer its San Jose customers a unique opportunity to join us at Cisco headquarters for a design thinking workshop. This exclusive gathering, of no more than 20 people, is designed for an immersive interactive one-day session bet...