11-18-2013 03:31 AM
Hi,
I've just upgraded a new SG-200-26P to firmware 1.3.5.58 and language version to 1.3.5.58.
Boot version is still in 1.1.0.6 (file size : 393,232 octets)
I've got the sx200_boot-13506.rfb but none of Firmware Image & Language File accept this file in the Upgrade/Backup Firmware/Language section.
Message :
Copy : Illegal software format
or
Copy : not a localization file format.
What should I do ?
Thanks,
Vincent
Solved! Go to Solution.
11-19-2013 02:38 AM
Check out this thread:
https://supportforums.cisco.com/message/4054032#4054032
FYI, I did this last night using the TFTP version of SolarWinds server.
11-18-2013 01:11 PM
Hi Vincent, there is a boot rfb file within the zip when you downloaded the firmware.
sx200_boot-13506.rfb
You need to load the boot to load the firmware.
-Tom
Please mark answered for helpful posts
11-19-2013 12:39 AM
Hi.
so, how can we upgrade the boot contained in the ZIP file ? I've succeed the firmware to 1.3.5.58 but not the boot to 1.3.5.06
11-19-2013 02:38 AM
Check out this thread:
https://supportforums.cisco.com/message/4054032#4054032
FYI, I did this last night using the TFTP version of SolarWinds server.
11-19-2013 04:27 AM
Great. it works perfectly.
(grrr the latest firmware still not let opssibility to store switch login & password...)
11-21-2013 01:05 AM
But TFTP don't work throught IPSEC VPN :/ I can't upgrade the next one
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide