What does your switch config look like? Ae you using auto smartports and macros? Those are nothing but headaches for me so I suggest to issue the global command: macro auto disabled and just configure the ports the way you like.
At least turn of auto smartports on the trunk link and hard code that.
-- please remember to rate and mark answered helpful posts --
thanks for your reply. Yes, by default it is using smartports, since that configuration is working fine with the SF200 switch. I disabled the smartport gi5, set VLAN 1U and VLAN 100T, then reboot the SPA504G. But few hours later it started again to reboot.
On the uplink itself (gi25) smartport was already disabled.
A consumer router may support a virtual private network (VPN) connection, but that's a far cry from the network and security capabilities that a business-class router can provide. All it takes is some IT talent and know-how to set one up. You're hear...
Cisco RV340 Series Secure Router
Security License Features and Performance
Today, secure networking is imperative for every business, even the smallest one. The RV340 series security routers provides business users with advanced connectivity and...
Recorded Live at SpiceWorld 2018!With the increasing complexity of technology lengthy configurations, dealing with multiple vendors, constant updates and maintenance –it can feel like you are navigating an unruly IT jungle. Join Cisco's Amy Blanchard as s...
Small Business Networking Products
Network and Smart Storage
FindIT Network Management
Voice and Conferencing
ATAs, Gateways,and Accessories