08-24-2019 06:59 AM
Hi all,
I'm about to buy SG220-26P switch. I have some other vendor access point which supports 802.3af mode A.
Does SG220-26P support only mode A or only mode B, or it supports both?
Most important question: will this other vendor access point work with SG220-26P?
Thanks in advance.
8.0af
Solved! Go to Solution.
08-26-2019 11:22 PM
Hi Sir,
The UniFi AP model is compatible with SG220-26P switch.
Regards,
Puneet Sandel
08-24-2019 08:21 AM
As per my understand cisco support 802.3AF with max power of 30W.
Mode A is good enough for PoE.
08-26-2019 09:49 PM
Hi Sir,
My name is Puneet Sandel and I am from Cisco small business support center.
As per your query, kindly let us know the models of the APs you will be using with the SG220-26P switch.
We will need to check the compatibility matrix for the same also. Regarding the PoE output of the switch, SG220-26P switch supports both 802.3af as well 802.3at PoE standard. Every port can provide you 30W of maximum PoE power. It has a PoE power budget of 180 Watts.
Kindly let us know if you have any other query related to the switch.
Regards,
Puneet Sandel
Technical Consulting Engineer
Global CX Centers – Small Business Support
08-26-2019 10:56 PM
Access points are UniFi AP AC LITE. Can you please check the compatibility. Thank you.
08-26-2019 11:22 PM
Hi Sir,
The UniFi AP model is compatible with SG220-26P switch.
Regards,
Puneet Sandel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide