08-24-2019 06:59 AM
Hi all,
I'm about to buy SG220-26P switch. I have some other vendor access point which supports 802.3af mode A.
Does SG220-26P support only mode A or only mode B, or it supports both?
Most important question: will this other vendor access point work with SG220-26P?
Thanks in advance.
8.0af
Solved! Go to Solution.
08-26-2019 11:22 PM
Hi Sir,
The UniFi AP model is compatible with SG220-26P switch.
Regards,
Puneet Sandel
08-24-2019 08:21 AM
As per my understand cisco support 802.3AF with max power of 30W.
Mode A is good enough for PoE.
08-26-2019 09:49 PM
Hi Sir,
My name is Puneet Sandel and I am from Cisco small business support center.
As per your query, kindly let us know the models of the APs you will be using with the SG220-26P switch.
We will need to check the compatibility matrix for the same also. Regarding the PoE output of the switch, SG220-26P switch supports both 802.3af as well 802.3at PoE standard. Every port can provide you 30W of maximum PoE power. It has a PoE power budget of 180 Watts.
Kindly let us know if you have any other query related to the switch.
Regards,
Puneet Sandel
Technical Consulting Engineer
Global CX Centers – Small Business Support
08-26-2019 10:56 PM
Access points are UniFi AP AC LITE. Can you please check the compatibility. Thank you.
08-26-2019 11:22 PM
Hi Sir,
The UniFi AP model is compatible with SG220-26P switch.
Regards,
Puneet Sandel
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: