cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
438
Views
0
Helpful
2
Replies

SG300 DHCP server are not issuing IP addresess *Please help!*

blabadie1
Level 1
Level 1


Guys,

I have been trying to figure this our for hours and I know it must be something simple. I have SG300-52p switch. I have configured my DHCP pool for one vlan, enabled DHCP server and nothing is getting issued IP's. I want to issue IP's on Vlan 20.

 

Below is my config:

config-file-header
ZEUSSW1
v1.3.5.58 / R750_NIK_1_35_647_358
CLI v1.0
set system mode router 

file SSD indicator encrypted
@
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
!
vlan database
vlan 10,20,50
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp server
ip dhcp pool network security
address low 172.32.50.11 high 172.32.50.62 255.255.255.192
lease infinite
domain-name FAKENAME.com
default-router 172.32.50.1
time-server 129.6.15.29
dns-server 8.8.8.8
exit
bonjour interface range vlan 1
hostname ZEUSSW1
username cisco password encrypted 6b283bb060c269432d08ac33b47a337c0a40035d privilege 15
ip ssh server
clock timezone EST -5
clock summer-time EDT recurring usa
sntp unicast client enable
sntp unicast client poll
sntp server nist1-macon.macon.ga.us poll
sntp server nist1-ny2.ustiming.org poll
sntp server nist1-pa.ustiming.org poll                
sntp server time-b.nist.gov poll
ip domain name zesuejuice.com
ip name-server  8.8.8.8
ip domain timeout 2
ip domain retry 1
!
interface vlan 1
 no ip address dhcp
 shutdown
!
interface vlan 10
 name DATA
 ip address 10.28.144.2 255.255.255.0
!
interface vlan 20
 name SECURITY
 ip address 172.32.50.2 255.255.255.192
!
interface vlan 50
 name temp
 ip address 192.168.167.2 255.255.255.0
!                                                     
interface gigabitethernet1
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet2
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet3
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet4
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet5
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet6
 switchport mode access                               
 switchport access vlan 20
!
interface gigabitethernet7
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet8
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet9
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet10
 switchport mode access
 switchport access vlan 20
!
interface gigabitethernet11
 switchport mode access
 switchport access vlan 20

2 Replies 2

Aleksandra Dargiel
Cisco Employee
Cisco Employee

Hi Blabadie,

Please run wireshark on the DHCP client, also you may want to try to change subnet mask to class C. 

Regards,

Aleksandra

The devices in question are IP cameras, so I will connect a PC on another port and assign it to the same vlan and run wireshark. Changing the subnet is a good idea, I might try that as well.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Switch products supported in this community
Cisco Business Product Family
  • CBS110
  • CBS220
  • CBS250
  • CBS350
Cisco Switching Product Family
  • 110
  • 200
  • 220
  • 250
  • 300
  • 350
  • 350X
  • 550X