I have a project I am working on that will require routing over a MetroE circuit to connect a few sites together back to HQ. Although, I know this can be accomplished several ways, I have come up with a solution that I think will work, but would like you all's input as to whether this is adequate and if my thoughts on how to properly "organize" the network are right.
I have been working with the SG300 line in Layer 3 mode and have not had any issues in a test setup I have here in the office. Basically my thought is to have a single VLAN/subnet allocated for each physical site. That will handle the basic interoffice connectivity etc. I also have a need to prioritize voice/video traffic throughout the entire network. My plan was to create an additional VLAN/subnet to house the teleconferencing equipment. Thats pretty much the jist of the setup. My only question is how to properly prioritize the voice/video VLAN. Once I get into the policy mapping area of the switches the options begin to get scarce and I'm not quite sure if I have the ganularity I need. I'm also curious if there is an "easier" or "better" way to accomplish what I need.
Any and all help, comments, etc. are apporeciated...
