cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


166
Views
0
Helpful
2
Replies
Beginner

SG350-28P 28-Port Gigabit PoE Managed Switch

i have this switch and i have ubiquiti Access point ( unify ac lite ) see attached photo

this AP wirks using POe ports. i cant power any AP. i read that class and limitaions found and i know my access works on 6.5 wt but i do no know how to change to class 2- or let switch power my AP

2 REPLIES 2
Beginner

Re: SG350-28P 28-Port Gigabit PoE Managed Switch

Check the cable. Possible it is damaged.

Switch autodetect class. Class 0 is enough for work.

Cisco Employee

Re: SG350-28P 28-Port Gigabit PoE Managed Switch

Hi,

By default PoE ‘Power Mode’ is Class Limit in SG350 Switch. You may disable the PoE class error detection on the switch once and check. With this setting, if a class error is detected on an interface, it will be ignored and PD will be classified as class 0.

To disable PoE class error detection, use the power inline class-error-detection Global Configuration mode command. To return to default setting, use the no form of this command.

 

Syntax

power inline class-error-detection [enable|disable]

no power inline class-error-detection

Example:

switchxxxxxx(config)# power inline class-error-detection disable

 

Note: Please make sure the SG350 switch firmware is latest (2.5.0.83).

https://software.cisco.com/download/home/286288281/type/282463181/release/2.5.0.83?i=!pp