09-12-2021 10:01 AM
Linux MARVELL_LINUX 3.4.69 #2 SMP Wed Dec 21 22:02:50 IST 2016
MAC Address : ac:4a:56:f0:90:28.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
^[
******************************************************************
*** Running SW Ver. 2.2.8.4 Date Dec 21 2016 Time 22:00:14 ***
******************************************************************
HW version is V05
Base Mac address is: ac:4a:56:f0:90:28
Dram size is : 512M bytes
Dram first block size is : 370688K bytes
Dram first PTR is : 0x80000000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x19000000
Flash size is: 256M
21-Dec-2016 09:29:09 %CDB-I-LOADCONFIG: Loading running configuration.
21-Dec-2016 09:29:09 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SG350-28P
Device 0: GT_98DX3235 (AlleyCat3)
CPLD version is: 0x03
------------------------------------
-- Unit Number 1 --
------------------------------------
21-Dec-2016 09:29:30 %INIT-I-InitCompleted: Initialization task is completed
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
Restarting system.
09-12-2021 01:09 PM
Try different latest firmware using Xmodem, still issue,. contact Small business TAC for assistance.
09-13-2021 05:37 AM
09-13-2021 06:26 AM
Open a TAC case please.
09-14-2021 01:20 AM
no resolve my problem
09-14-2021 02:02 AM
Hi hashir,
Most probably your switch is for RMA. Please contact TAC via one of the phones on the following link:
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Thanks
09-14-2021 02:17 AM
as suggested on above post, Looks for me hardware issue Raise TAC case for RMA
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: