I need to setup a VLAN using a SLM2008 and connect it to our Fortigate Internet Firewall. I'm doing this to segregate the SLM2008 traffic from the main network which is already connected to the firewall. I have created VLAN #200 in the SLM2008. I have read all the SLM2008 documentation and spent quite a lot of time on these forums but can't seem to get this working.
1. The firewall is seen on the network as another multi-port hub, so does this mean that the SLM2008 must be connected to it via a VLAN trunk link?
2. On this forum someone said you must use Port 1 of the SLM2008 if you want to do trunking? True?
3. If #2 is correct, then how do you setup port 1 as a trunk? There is no trunk option in the web gui.
QuestionDear All,I'm currently looking for firmware version 220.127.116.11 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 18.104.22.168 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...