small configure help please? I have 3 300-28 switches, I want to connect them and avoid stp (stp setup)
I have a small network. I have 3 300-28 cisco switches. I already connected my 3 servers and clients with the switch 1 and now I want to add more clients and I need to add my other two switches in the network. Please guide me with the simple configuration So I can connect them all and avoid loop (stp). Thanks
Thanks for your reply. I am implementing it tomorrow. By just conecting the switches together at trunk ports will there be no loop? I don't want my network chowk. I hope it will work well. I might need further help, please reply.
1. I will do setting on all switches. Assign IP addresses to switches (to Vlan 1 default).
2. Set one port (e.g 28) as trunk and all others as Access on all three switches.
3. Then I will connect the switches with each other at trunk ports. Hope there will be no loop in this setting.
4. Do I need to set any setting for stp in switches ?
A consumer router may support a virtual private network (VPN) connection, but that's a far cry from the network and security capabilities that a business-class router can provide. All it takes is some IT talent and know-how to set one up. You're hear...
Cisco RV340 Series Secure Router
Security License Features and Performance
Today, secure networking is imperative for every business, even the smallest one. The RV340 series security routers provides business users with advanced connectivity and...
Recorded Live at SpiceWorld 2018!With the increasing complexity of technology lengthy configurations, dealing with multiple vendors, constant updates and maintenance –it can feel like you are navigating an unruly IT jungle. Join Cisco's Amy Blanchard as s...