Solve the Duplicate IP error in Cisco SG 500 switch
I am see the following error in the system log of my SG 500 Cisco switch:
%IPADTBL-N-IPDUPLICATE: Duplicate IP address 192.168.0.1 from MAC 00:xx:xx:12:43:2e was detected on VLAN 200, port gi1/26, aggregated (4)
When this error occurs, the PC connected to the WiFi access point on Port 13 (access to VLAN 200) freezes, and it continues browsing after a while. I don't know what causes this error.
The 00:xx:xx:12:43:2e MAC address belongs to my router, and the 192.168.0.1 IP is the IP of the VLAN 200, the IP of the VLAN interface created on the Router, the IP of the default gateway, DHCP and DNS. DHCP is done by the SG 500 which is set in Layer 3 mode, while the DNS is provided by the router.
Do you see any problem in my set up of DHCP pools (see attached pics)?
Maybe there is a problem with my VLAN setup? VLAN 200 is supposed to provide connectivity to guests through wifi AP connected at port 13 (access), VLAN 1 is the native VLAN. And port 26 is the uplink to router set in trunk mode.
A consumer router may support a virtual private network (VPN) connection, but that's a far cry from the network and security capabilities that a business-class router can provide. All it takes is some IT talent and know-how to set one up. You're hear...
Cisco RV340 Series Secure Router
Security License Features and Performance
Today, secure networking is imperative for every business, even the smallest one. The RV340 series security routers provides business users with advanced connectivity and...
Recorded Live at SpiceWorld 2018!With the increasing complexity of technology lengthy configurations, dealing with multiple vendors, constant updates and maintenance –it can feel like you are navigating an unruly IT jungle. Join Cisco's Amy Blanchard as s...
Small Business Networking Products
Network and Smart Storage
FindIT Network Management
Voice and Conferencing
ATAs, Gateways,and Accessories
This document is attempt to recreate content of original document created by famous @Patrick Born. Cisco has considered to destroy such valuable document for an unknown reason.In order to capture debug and syslog messages from your SPA1x2 and SPA232D phon...