I've seen this thread already before and had this already once before with this type of switch.
My SG300-20-20 needs a write operation (like copy run start) before it start functioning as it should When connected via the serial I'll see it completely booted but my PC's of different type (MAC, Win, Laptops, Desktops) do not receive an IP address from the switch. Although you see the lights on the switch and on the ethernet cards lightening. On top of this the status of the OS of the PC shows connected but no IP address is received.
The switch itself does not have the mac address neither.
When executing the command : copy run start , on the switch immediately all machines recieve their IP and start functioning. But on the other hand the communication remains slow. Slow in terms of its capabilities
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 188.8.131.52 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 184.108.40.206 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...