Hey Guys
I need some help, in my venture in trying to learn switches i flashed my whole switch :(
I am now getting this error
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
I downloaded the c2950-i6q4l2-tar.121-22.EA14.tar for the switch but im unclear on how to load that the the catalyst 2950
switch: dir flash:
Directory of flash:/
3 -rwx 269 <date> env_vars
7739904 bytes available (1536 bytes used)
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950-24 starting...
Base ethernet MAC Address: 00:15:2b:46:7b:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 7739904
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
switch:
switch: flash
Initializing Flash...
...The flash is already initialized.
switch: dir/
Unknown cmd: dir/
switch: dir
List of filesystems currently registered:
flash[0]: (read-write)
xmodem[1]: (read-only)
null[2]: (read-write)
bs[3]: (read-only)
switch: 0
Unknown cmd: 0
switch: flash_init
switch: load_helper
switch: dir flash:
Directory of flash:/
2 -rwx 269 <date> env_vars
7739904 bytes available (1536 bytes used)
switch:
