Trunked VLANs between SLM2024 and SA520 Security appliance
I have a problem configuring the SA520 router and the SLM2024 (2008) switches to communicate trunked vlans...
What I want to accomplish is a number of tagged VLANs originating in the router, tagged and trunked to the switch where they are mapped to individual ports. The mapping of the ports in the switch seems fair enough, and also the creation, tagging and trunking of vlans in the router. The problem is that I don't konw how to configure the port in the switch that should be trunked up to the router.
I also want to forward the trunked VLAN to a number of WLAN-devices (WAP4410N) where I intend to use the VLAN->SSID-mapping funcionality.
In short, anytime you want to have multiple vlans across a single port you need to make this a trunk port. In the case of the small business series switches, you need to make sure all non-native vlans are tagged over the trunk link. Many times additional vlans are set for excluded and not tagged. Something to check.
Do please let me know what you find. Kindest regards,
Join us for an exclusive Cisco Customer Connection online briefing: Introducing Cisco Business Wireless Access Points and Mesh Extenders on February 25 at 8 am PT. Cisco product managers will provide a technical deep dive on these new wireless products t...
QuestionDear All,I'm currently looking for firmware version 18.104.22.168 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 22.214.171.124 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...