06-19-2019 01:05 PM
Hello,
I recently got 2 SG200-26P switches. Now I want to set a trusted DHCP server in their configuration since I don't want somebody coming into my network( Using these switches for LAN-party's) and run a DHCP server themselves. How or where in this web GUI can I put in a trusted dhcp server IP or port?
Kind regards
Solved! Go to Solution.
06-25-2019 12:42 AM
Hi,
My name is Ritesh Sharma from Cisco TAC.
The DHCP trust/untrust ports can be created by enabling a feature called DHCP snooping in the switch.
However, SG200 is L2 switch only, so this mean switch will not support dhcp snooping.
It is supported on switches SG300/500, Sg350/550 etc.
Please mark this as helpful of it resolves your query.
Regards
Ritesh Sharma
06-25-2019 12:42 AM
Hi,
My name is Ritesh Sharma from Cisco TAC.
The DHCP trust/untrust ports can be created by enabling a feature called DHCP snooping in the switch.
However, SG200 is L2 switch only, so this mean switch will not support dhcp snooping.
It is supported on switches SG300/500, Sg350/550 etc.
Please mark this as helpful of it resolves your query.
Regards
Ritesh Sharma
04-09-2023 03:20 AM
Hello,
I want to disable dhcp from my cisco sg200 28p,
i need to keep my switch default IP address
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide