unable to remove 3850 from switch stack

[JavaJunkie]

Hello, I originally had 2 3850 12S in a two stack switch using smart stack cables.  I separated the stack, removed the cable deleted the switch2 provision statement and the vlan.dat, did a write erase.  

Now when I reboot the second switch I have Gi2/0/1 - 12 showing instead of Gi1/0/1 - 12.

How can I get this back to the defaults of Gi1/0/1 - 12?

[cmarva]

use the switch renumber command, that will get you there.

[GRANT3779]

Run the following from enable mode -

switch 2 renumber 1

You will need to reboot for it to take effect.

[JavaJunkie]

This does not work.  "No such resource".

Any other ideas?

Thanks for the reply

[GRANT3779]

What switches do you have provisioned still?

Sh switch detail

Sh run | inc switch

[JavaJunkie]

Switch 2

[Leo Laohoo · Accepted solution]

---

@JavaJunkie wrote:

This does not work.  "No such resource"

---

The command "switch 2 renumber 1" can only be used in ENABLE mode (and not configuration mode).