Hi Support members, i have a question regard to switch SFE2010P, i have 2 vlan ( data and voice) and we want to configure Ip phones SPA502G, the question here is how can i make to suport 2 vlans on the same switch port, like the catalyst IOS switch port acces vlan x and switch port voice vlan x, if i set up the switch with the voice vlan like tagged doest work, but if i set up the voice vlan like untagged vlan its works but the PC attached to the data port on the SPA502G doest work, can you help me with this issue?
You would first have to create your 2 VLAN's. They will need to match the VLan tagging for the rest of the network.
Trunk the port going to the rest of the network with Data Vlan Untagged, Voice Tagged.
Trunk the ports going to the phone/Computers with Data Vlan Untagged, Voice Tagged.
Since these switches don't do CDP or LLDP-Med you will need to manually configure the phones Voice Vlan.
A Switch that works much better in a Voice Environment is the SG or SF series switches They currently don't have a Stacking model, but work is being done to have one available. Not sure on the ETA. The ESW also has some Voice capabilities for automated configuration.
A consumer router may support a virtual private network (VPN) connection, but that's a far cry from the network and security capabilities that a business-class router can provide. All it takes is some IT talent and know-how to set one up. You're hear...
Cisco RV340 Series Secure Router
Security License Features and Performance
Today, secure networking is imperative for every business, even the smallest one. The RV340 series security routers provides business users with advanced connectivity and...
Recorded Live at SpiceWorld 2018!With the increasing complexity of technology lengthy configurations, dealing with multiple vendors, constant updates and maintenance –it can feel like you are navigating an unruly IT jungle. Join Cisco's Amy Blanchard as s...
Small Business Networking Products
Network and Smart Storage
FindIT Network Management
Voice and Conferencing
ATAs, Gateways,and Accessories
This document is attempt to recreate content of original document created by famous @Patrick Born. Cisco has considered to destroy such valuable document for an unknown reason.In order to capture debug and syslog messages from your SPA1x2 and SPA232D phon...