Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily unavailable starting Jan 31st, 2020. Cisco is working on an update to re-enable this feature.
We will keep you posted when this feature will be available again. It is important to know that after January 31st, 2020 to upgrade the firmware to a new version a manual upgrade will be required even if ASD has been turned on.
You would need to download the firmware and store it on your local hard drive of your PC or USB stick.
From there you can update the RV router using the GUI. Alternatively if you use FindIT Network Manager you can do it from there.
This is effective for firmware versions:
RV340, RV340W, RV345, RV345P: firmware 1.0.03.16 and earlier
RV160, RV160W, RV260, RV260W, RV260P: firmware 1.0.00.16 and earlier
Sorry for the inconvenience and we will update this post when we have more news.
this is the first time I work with switchI created 3 VLANs in switch VLAN 10 for pcs (native VLAN)VLAN 20 for voice (telephone)VLAN 30 for access pointsall interfaces have trunk typeall interfaces in VLAN 10 are untaggedand in VLAN 20 are taggedI linked t...
I have configured my SAP112 Adapter following instructions from VOIP provider (Sipgate). Calls can be received without any issues. If I make an outgoing call the call is fine but once the call is ended I cannot receive calls or make calls. The Phone 1 lig...
I am in need of assistance with setting up/ensuring that 911 calling is functional at a new warehouse that my company is standing up. We currently have a corporate office and two warehouses for which 911 calling appears to already be set up. However, this...
Hello!I am trying to connect our Cisco SPA50X with the AD of the company. I have the problem that I have several users with the same extension but only one enabled, so when I configure the directory with LDAP all these users appear to me while I need only...